What is the curing method of brake shoes

The conventional maintenance method of brake shoes: Most cars adopt the front disc and rear drum brake structure, in general, the front brake shoes wear relatively fast, the rear brake shoes use a relatively long time, in the daily inspection and maintenance should pay attention to the following aspects: 1, under normal driving conditions every 5000 km to check the brake shoe, not only to check the remaining thickness, but also check the condition of shoe wear, whether the degree of wear on both sides is the same, whether the return position is comfortable, etc. . If abnormal condition is found, it must be dealt with immediately. Brake shoes are generally composed of iron lining plate and friction material two parts, must not wait for friction material parts are worn off before replacing the shoes. The front brake shoes of the Jetta, for example, are 14 mm thick, while the replacement limit is 7 mm, which includes over 3 mm of iron liner and nearly 4 mm of friction material. Some vehicles are equipped with brake shoes alarm function, once reached the wear limit, the instrument will alarm to replace the shoes. If the shoes reach the limit of use, they must be replaced. Even if they can be used for a period of time, the braking effect will be reduced and the driving safety will be affected. 3, replacement to replace the original spare parts provided by the brake pad, only in this way, in order to make the brake pad and brake disc between the good braking effect, wear and tear. 4. When replacing the shoes, the brake sub-pump must be pushed back with a special tool. Do not press back hard with other crowbars, this can easily lead to brake caliper guide screw bending, so that the brake pad stuck. 5, after changing the shoes, be sure to step on a few feet brake, in order to eliminate the shoes and brake disc gap, resulting in the first foot did not brake, accident prone. 6, brake shoes replacement, to run-in 200 km to achieve a better braking effect, just change the shoes to be cautious driving. The above is to Far Auto Parts Co. , Ltd. . Small series for you to provide the maintenance methods, I hope you are useful. Our main products are: Brake Drum, wheels, brake disc, brake shoes and other domestic, imported cars, semi-trailer, full trailer chassis accessories, a complete range, stable and reliable quality. If there is demand, welcome friends to MY COMPANY TO PURCHASE!